A set of 6 different Alaska road barriers in PLA filament print for tabletop systems like Fallout Wasteland in 28-32mm format. Single as well as double pole versions can be built.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,12 mm
Material: PLA
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A set of 2 PLA filament print bridge parts for tabletop systems like Fallout Wasteland in 28-32mm format. Single as well as double pole versions can be built.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,12 mm
Material: PLA
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A set of 6 different Alaska road barriers in PLA filament print for tabletop systems like Fallout Wasteland in 28-32mm format. Single as well as double pole versions can be built.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,12 mm
Material: PLA
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A single resin Coke machine for tabletop systems like Fallout Wasteland, historical tabletop systems or dioramas in 28-32mm format. Single as well as double pole versions can be built. The model is available in two versions: Healed and Defective.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,12 mm
Material: PLA
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A single resin ice machine for tabletop systems like Fallout Wasteland, historical tabletop systems or dioramas in 28-32mm format. Single as well as double pole versions can be built. The model is available in two versions: Healed and Defective.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,05 mm
Material: Resin
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A single resin phone booth for tabletop systems like Fallout Wasteland, historical tabletop systems or dioramas in 28-32mm format. Single as well as double pole versions can be built. The model is available in two versions: Healed and Defective.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,05 mm
Material: Resin
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A single resin barrier for tabletop systems like Fallout Wasteland, historical tabletop systems or dioramas in 28-32mm format. Single as well as double pole versions can be built. The model is available in two versions: Healed and Defective.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0.05 mm
Material: Resin
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A single resin fire hydrant for tabletop systems like Fallout Wasteland, historical tabletop systems or dioramas in 28-32mm format. Single as well as double pole versions can be built. The model is available in two versions: Healed and Defective.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0.05 mm
Material: Resin
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A set of 10 different jersey road barriers as PLA filament print for tabletop systems like Fallout Wasteland in 28-32mm format. Single as well as double pole versions can be built.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,12 mm
Material: PLA
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A set of 6 different makeshift resin fences for tabletop systems like Fallout Wasteland in 28-32mm format. Single as well as double pole versions can be built.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,05 mm
Material: Resin
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A single resin post box for tabletop systems like Fallout Wasteland, historical tabletop systems or dioramas in 28-32mm format. Single as well as double pole versions can be built. The model is available in two versions: Healed and Defective.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,05 mm
Material: Resin
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
A set of two computer terminals on 25mm base.
The models are unpainted and without base design.
Designer: EC3D
Layer height: 0,05 mm
Material: Resin
The models are already out of the support structures, was washed and UV light cured. It therefore requires little or no post-processing such as removing remnants of the support structure.
Multi-part resin set for building a Retro Camper Van for post-apocalyptic tabletop systems like Fallout Wasteland in 28-32mm format.
The models are unpainted and without base design.
Designer: EC3D
The models are already out of the support structures, was washed and UV light cured. Thus, it requires little or no post-processing such as removing remnants of the support structure.
Multi-part resin set for building a Retro Camper Van for post-apocalyptic tabletop systems like Fallout Wasteland in 28-32mm format.
The models are unpainted and without base design.
Designer: EC3D
The models are already out of the support structures, was washed and UV light cured. Thus, it requires little or no post-processing such as removing remnants of the support structure.
Multi-part resin set for building a Road-Warrior car for post-apocalyptic tabletop systems like Fallout Wasteland in 28-32mm format.
The models are unpainted and without base design.
Designer: EC3D
The models are already out of the support structures, was washed and UV light cured. Thus, it requires little or no post-processing such as removing remnants of the support structure.
Designer:
EC3D / Hero's Hoard
€35.00*
This website uses cookies to ensure the best experience possible. More information...
